£34.99
In stock
6 in stock
Give sheds, summerhouses, garden offices, log cabins and other pitched garden buildings a smart, professional roof finish with these Green 3-Tab Square Reinforced Fibreglass Roofing Shingles.
Manufactured using a lightweight glass fibre-based bitumen construction, these durable roof shingles combine an attractive green mineral finish with a classic 3-tab square pattern, creating the appearance of individual roof tiles without the weight associated with traditional clay, concrete or slate roofing.
Each pack provides approximately 3m² of finished roof coverage and contains 21 individual 1 metre-long shingle strips, making them an excellent choice for decorative garden buildings, sheds, summerhouses, workshops, chalets, stables and similar pitched roofing applications.
The traditional 3-tab square design creates a clean, regular tiled appearance across the roof.
Once installed in overlapping courses, each strip forms three visible rectangular tabs, producing a neat geometric pattern that works particularly well with both modern and traditional garden buildings.
These shingles are ideal for customers searching for:
Each pack provides approximately 3 square metres of finished roof coverage when the shingles are installed with the correct overlaps.
The pack contains 21 individual shingles, allowing installers to build up the roof surface in overlapping horizontal courses.
When calculating the number of packs required, remember that the stated 3m² figure is the intended installed coverage.
It is still sensible to allow some additional material for:
Each pack contains 21 individual 3-tab shingle strips.
This makes it straightforward to calculate the quantity needed for a particular roof once the total roof area has been measured.
For larger buildings, multiple packs can be combined to cover the complete roof.
Each shingle strip measures approximately 100cm long.
The one-metre strip format makes installation much faster than positioning individual small tiles while still producing the visual appearance of multiple separate roofing elements.
The strips are installed in overlapping rows across the roof slope.
Each shingle provides approximately 30cm of actual vertical roof coverage once the required overlap has been taken into account.
Overlapping is a fundamental part of shingle roofing because it helps:
Correct overlap and alignment are essential for a professional installation.
The 3-tab square profile produces a clean, consistent appearance across the roof.
Each shingle strip creates three visible rectangular sections once installed.
This gives the completed roof a traditional tiled effect without requiring individual heavyweight roof tiles.
The pattern works particularly well on:
The green finish makes these shingles especially suitable for timber buildings and landscaped garden environments.
Green roofing complements:
The mineral-finished surface also provides the attractive exposed face of the finished roofing system.
These roofing shingles use a reinforced glass fibre-based construction.
Fibreglass provides good dimensional stability while keeping the roofing material relatively lightweight.
Benefits include:
This makes reinforced fibreglass shingles particularly well suited to timber garden buildings.
Traditional clay, concrete and slate roofing can place a significant load on a roof structure.
Fibreglass shingles provide a substantially lighter alternative for suitable buildings.
This can make them ideal for:
The supporting roof structure must still be correctly designed and structurally sound.
One of the main reasons customers choose 3-tab shingles is appearance.
Standard roll roofing felt creates a relatively flat finished surface.
3-tab shingles create a much more decorative, layered look that resembles traditional individual roofing tiles.
This can dramatically improve the finished appearance of a garden building.
These Green 3-Tab Square Shingles are an excellent upgrade for a pitched garden shed.
They are ideal for:
Compared with basic roll roofing felt, shingles create a more decorative and substantial-looking roof.
Summerhouses are particularly well suited to decorative roofing shingles.
The green tiled effect complements natural timber while creating a high-quality finished appearance.
For the best overall look, matching green ridge shingles can be used at the roof apex.
Modern garden offices frequently benefit from a more attractive roofing finish than conventional shed felt.
Green 3-tab fibreglass shingles provide a neat tiled effect suitable for:
Green shingles are particularly attractive on log cabins.
The green mineral finish contrasts naturally with timber walls while fitting comfortably into garden surroundings.
The lightweight construction also makes fibreglass shingles a practical choice for many timber cabin roofs.
Other suitable applications can include:
Always ensure the roof structure and pitch are appropriate for shingle installation.
Unlike the hexagonal shingles in the Felt Products range, this 3-tab product is not marketed around a peel-off adhesive backing.
The specified fixing system uses:
Hot-applied bitumen or cold bitumen mastic together with galvanised ELH clout nails.
For many DIY and general building applications, a compatible cold bitumen mastic may provide a convenient bonding method where permitted by the installation specification.
Where hot application is used, appropriate training, fire precautions and suitable roofing equipment are essential.
Mechanical fixing is an important part of the shingle installation.
Suitable galvanised Extra Large Head — ELH — clout nails should be used.
Their wider heads help spread pressure across the shingle and reduce the likelihood of the fixing pulling through the material.
Benefits include:
Roofing shingles form the decorative outer roof layer.
They should be installed over an appropriate roofing underlay where required by the roof specification.
Suitable underlay helps:
The roof deck should be:
Poor preparation can affect both the appearance and long-term performance of the finished roof.
Roofing shingles are normally installed beginning at the lower edge of the roof and working upwards towards the ridge.
Successive courses overlap the rows beneath them.
This creates a layered arrangement that encourages rainwater to flow:
ridge → down across the shingles → towards the eaves
rather than underneath the roofing material.
Successive rows should be correctly offset so that joints do not align vertically.
Correct staggering helps:
Accurate installation of the first course is important because subsequent rows follow its alignment.
Before permanently fixing the first shingles:
A small alignment error at the first row can become much more noticeable higher up the roof.
Where possible within the specified installation pattern, nails should be positioned so that the next overlapping course protects the fixing area.
This helps create a cleaner finished appearance and reduces direct weather exposure around fixings.
The 3-tab shingles cover the main roof slopes, but the apex requires a suitable ridge detail.
Matching Green Reinforced Fibreglass Ridge Roofing Shingles can provide a coordinated finish.
A complete green shingle roofing system can therefore include:
For SEO and customer convenience, this product page should link directly to:
This helps customers purchase the complete roof system while strengthening the internal SEO structure of the roofing-shingle category.
Felt Products offers both 3-tab square and hexagonal roofing shingles.
The key difference is the finished appearance.
3-Tab Square Shingles
Hexagonal Shingles
Both are lightweight reinforced fibreglass roof coverings.
Colour is another important consideration.
Green roofing shingles work particularly well with:
Black shingles offer a darker contemporary appearance, while red shingles create a warmer traditional tiled effect.
Giving each colour its own optimised product page can help capture colour-specific searches.
These shingles are ideal for new roofing projects such as:
Ordering underlay, main shingles, ridge pieces and fixings together helps make installation more straightforward.
Green 3-tab shingles can also be used when upgrading an appropriate existing roof.
They are particularly useful where the existing covering has become:
Always inspect and repair the underlying roof deck before installing the new roofing system.
The current Green 3-Tab Square Fibreglass Shingles are supplied with a 10-year guarantee.
Correct installation remains essential for long-term performance.
To achieve the intended lifespan:
Choose Green 3-Tab Square Reinforced Fibreglass Roofing Shingles – 3m² Pack for a lightweight, attractive and professional-looking roofing finish ideal for sheds, summerhouses, log cabins, garden offices and other suitable pitched timber buildings.
Thank you for visiting and shopping at www.feltproducts.co.uk. Following are the terms and conditions that constitute our Shipping Policy.
We only deliver to mainland UK excluding the Scottish Isles. All other areas, please call for pricing.
All orders are processed within 2-3 business days. Orders are not shipped or delivered on weekends or public holidays.
If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone.
Shipping charges for your order will be calculated and displayed at checkout.
| Shipment method | Estimated delivery time | Shipment cost |
| Standard | 3-5 business days | As specified at checkout |
Delivery delays can occasionally occur.
You will receive a Shipment Confirmation email once your order has shipped containing your tracking number(s). The tracking number will be active within 24 hours.
Felt Products Northern Ltd is not responsible for any customs and taxes applied to your order. All fees imposed during or after shipping are the responsibility of the customer (tariffs, taxes, etc.).
Felt Products Northern Ltd is not liable for any products damaged or lost during shipping. If you received your order damaged, please contact the shipment carrier to file a claim.
Please save all packaging materials and damaged goods before filing a claim.
We currently do not ship outside the UK.
Our Return & Refund Policy provides detailed information about options and procedures for returning your order.
