£34.99
In stock
9996 in stock
Protect brickwork, blockwork and masonry against rising damp and moisture penetration with this 600mm Wide Damp Proof Course (DPC), supplied as a convenient pack of 2 x 30 metre rolls.
Designed to create an effective horizontal moisture barrier within walls and masonry construction, this durable and flexible DPC helps prevent ground moisture travelling upwards through bricks, blocks and mortar.
With its generous 600mm width, this damp proof course is ideal for wider wall details, foundations and construction applications where narrower DPC rolls do not provide sufficient coverage.
A correctly installed Damp Proof Course is an important part of protecting buildings against rising moisture.
Installed within brick or block masonry, the DPC creates a continuous waterproof layer designed to interrupt the movement of moisture through porous construction materials.
For customers searching for 600mm damp proof course, wide DPC roll, 30m DPC, or damp proof course for brick and block walls, this 2-roll pack provides a practical solution for domestic and trade building projects.
Rising damp occurs when moisture from the ground travels upwards through porous materials such as brickwork, blockwork and mortar.
Without an effective damp-proof barrier, this moisture can eventually reach internal walls and finishes.
Installing a suitable DPC within the masonry helps interrupt this upward moisture movement and creates a protective barrier against damp.
Correct installation can help reduce the risk of:
At 600mm wide, this DPC provides significantly greater coverage than standard narrow wall DPC rolls.
The increased width makes it particularly useful for:
The material can also be cut where required to suit specific construction details.
Each pack contains 2 individual rolls, with each roll measuring 600mm wide x 30m long.
This provides a total of 60 linear metres of DPC across the pack.
The two-roll pack is especially useful for:
Buying two rolls together also helps ensure sufficient material is available for overlaps, junctions and additional detailing.
This damp proof course features a serrated diamond-cut surface on both the top and bottom.
The textured finish helps improve grip within the mortar bed and reduces the likelihood of the DPC slipping while bricks or blocks are being positioned.
This provides several practical benefits:
The textured surface is an important advantage compared with completely smooth plastic sheet materials.
This DPC is designed for horizontal anti-damp isolation within brick and block construction.
It can be incorporated into masonry walls to create a continuous barrier against rising ground moisture.
Typical applications include:
Damp proof course needs to be strong enough for permanent installation within masonry while remaining flexible enough to handle during construction.
This 600mm DPC is designed to provide both qualities.
Its flexible construction makes it straightforward to:
while maintaining the durability required for long-term damp protection.
Mortar and other cement-based construction materials are naturally alkaline.
Because DPC remains permanently embedded within masonry, resistance to alkalis is important for long-term durability.
This product is specified as alkali resistant, helping it remain suitable for prolonged contact with mortar and masonry materials.
This damp proof course has a specified watertightness greater than 2kPa.
When installed correctly as a continuous layer, it creates an effective barrier against moisture passing through the masonry.
Care should be taken around:
to avoid gaps in the damp-proofing system.
The DPC is specified as resistant to low temperatures down to approximately -25°C.
This helps it maintain flexibility during cold-weather storage and construction conditions.
Cold-weather flexibility is particularly useful on building sites where materials may be stored outdoors before installation.
This 600mm Damp Proof Course is suitable for a wide variety of building applications, including:
Correct installation is essential to create an effective moisture barrier.
When fitting:
A continuous installation is important because gaps can allow moisture to bypass the damp-proof course.
A Damp Proof Course (DPC) and Damp Proof Membrane (DPM) both help protect buildings against moisture, but they are normally installed in different areas.
A DPC is typically installed within walls and masonry to prevent moisture travelling vertically through brick or blockwork.
A DPM is normally supplied as a much larger sheet and installed beneath concrete floors and slabs to prevent ground moisture entering through the floor.
In many buildings, the two products are connected to create a continuous damp-proof barrier.
Where a floor also incorporates a Damp Proof Membrane, the wall DPC and floor membrane may need to be correctly connected.
Maintaining continuity between the two damp-proofing systems helps prevent moisture finding a route around the protective barrier.
Always follow the relevant construction detail and building specification for the project.
The 600mm wide DPC is suitable for both new construction and appropriate refurbishment work.
It is particularly useful when:
Choose Damp Proof Course 600mm Wide x 30m – Pack of 2 Rolls for a wide, durable and flexible waterproof barrier designed to help protect brickwork, blockwork and masonry against rising damp and ground moisture.
Thank you for visiting and shopping at www.feltproducts.co.uk. Following are the terms and conditions that constitute our Shipping Policy.
We only deliver to mainland UK excluding the Scottish Isles. All other areas, please call for pricing.
All orders are processed within 2-3 business days. Orders are not shipped or delivered on weekends or public holidays.
If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone.
Shipping charges for your order will be calculated and displayed at checkout.
| Shipment method | Estimated delivery time | Shipment cost |
| Standard | 3-5 business days | As specified at checkout |
Delivery delays can occasionally occur.
You will receive a Shipment Confirmation email once your order has shipped containing your tracking number(s). The tracking number will be active within 24 hours.
Felt Products Northern Ltd is not responsible for any customs and taxes applied to your order. All fees imposed during or after shipping are the responsibility of the customer (tariffs, taxes, etc.).
Felt Products Northern Ltd is not liable for any products damaged or lost during shipping. If you received your order damaged, please contact the shipment carrier to file a claim.
Please save all packaging materials and damaged goods before filing a claim.
We currently do not ship outside the UK.
Our Return & Refund Policy provides detailed information about options and procedures for returning your order.
