£26.40
In stock
9999 in stock
Secure your corrugated roofing sheets with Onduline 65mm Annular Ring Roofing Nails – Black, purpose-designed roofing fixings for installing Onduline corrugated bitumen roofing sheets securely and professionally.
Supplied in a large 400-piece pack, these heavy duty roofing nails are ideal for larger roofing projects, multiple sheds, garages, workshops, agricultural buildings and trade installations.
Manufactured from strong zinc-galvanised carbon steel and finished with a durable black HDPE roofing head, Onduline roofing nails are designed to provide excellent fixing strength, corrosion resistance and a neat colour-matched finish.
Using the correct roofing fixings is essential when installing corrugated bitumen roofing sheets.
Onduline nails are specifically developed for use with Onduline corrugated roofing sheets and roofing systems, helping provide a strong mechanical fixing while maintaining the weather-resistant performance of the roof.
For customers searching for Onduline roofing nails, 65mm roofing nails, corrugated roofing fixings or black roofing nails, this convenient 400-piece pack provides an excellent solution for larger projects.
With an effective fixing length of approximately 65mm, these roofing nails are designed to securely fasten Onduline roofing sheets to the supporting roof structure.
The substantial nail length provides the penetration required for a strong and reliable roofing-sheet fixing when used with the appropriate roof construction.
For customers specifically searching for 65mm corrugated roofing nails or 65mm Onduline fixings, these purpose-made nails provide a much better solution than using general-purpose nails.
Annular ring roofing nails are designed to provide excellent grip within timber.
The ringed shank increases resistance to the nail pulling back out of the supporting timber, helping maintain a secure fixing when roofing sheets are exposed to changing weather and wind loads.
This makes them particularly suitable for lightweight corrugated roofing installations where reliable mechanical fixing is essential.
Onduline roofing nails are manufactured from strong carbon steel and fully zinc galvanised to improve resistance against rust and corrosion.
Roofing fixings are continually exposed to moisture and changing weather conditions, making corrosion resistance particularly important.
The galvanised construction helps provide dependable long-term performance for external roofing installations.
Each Onduline nail incorporates a purpose-designed 18mm diameter roofing head.
The larger head helps spread fixing pressure across the corrugated roofing sheet while providing a more effective seal around the fixing point.
This is particularly important for corrugated roofing systems, where undersized or unsuitable fixings could potentially damage the sheet or compromise weather protection.
The nail head is manufactured from tough HDPE polyethylene and includes UV-resistant additives for external use.
The black colour is designed to coordinate with black Onduline corrugated bitumen roofing sheets, providing a cleaner and more professional finished appearance than ordinary bright metal fixings.
Once installed, the black heads blend neatly into the roofing surface rather than standing out visually.
These black fixings are an excellent choice when installing:
Using colour-coordinated roofing fixings helps give the completed roof a much neater appearance.
With 400 roofing nails per pack, this larger pack is ideal for substantial roofing projects or customers installing multiple sheets.
Onduline generally recommends approximately 20 fixings per roofing sheet, although the exact number and fixing pattern depend on the roof pitch and specific roofing system.
At around 20 fixings per sheet, a 400-piece pack can provide enough nails for approximately 20 roofing sheets, subject to the exact installation specification.
This makes the larger pack especially useful for:
Onduline 65mm Black Roofing Nails are suitable for a wide range of roofing projects, including:
Correct mechanical fixing is particularly important on lightweight corrugated roofs.
Strong winds can create uplift forces on roofing sheets, especially around exposed edges and roof corners.
Onduline roofing fixings are designed to provide strong pull-out resistance, helping keep roofing sheets securely attached to the supporting structure when fitted according to the manufacturer’s instructions.
This is one of the reasons Onduline recommends using its purpose-designed fixings rather than standard nails.
A roof fixing must do more than simply hold the roofing sheet in place.
The fixing point also needs to maintain the weather-resistant performance of the roofing system.
The purpose-designed Onduline roofing head helps provide a secure seal around each nail position, reducing the risk of water penetration when correctly installed.
Onduline recommends approximately 20 nails or screws per roofing sheet, depending on the roof pitch and installation requirements.
It is important to follow the correct fixing pattern rather than simply using fewer nails to speed up installation.
Correct fixing quantity and positioning help provide:
Always follow the Onduline fixing guide for the specific sheet and roof pitch being installed.
Onduline roofing nails are designed for straightforward installation using a conventional hammer.
When installing:
Correct fixing technique helps prevent distortion or damage to the corrugated roofing sheet.
Onduline corrugated roofing sheets should generally be mechanically fixed through the top of the corrugation rather than the lower water channel, following the manufacturer’s fixing instructions.
This helps minimise the risk of water collecting around the fixing point and contributes to the overall weather resistance of the roofing system.
These nails are designed to work as part of a complete Onduline roofing installation.
Depending on your project, you may also require:
Using compatible sheets, accessories and fixings helps create a more secure and professional finished roof.
The 400-piece pack is suitable for both completely new roofing installations and refurbishment projects.
It is ideal when:
Choose Onduline 65mm Black Annular Ring Roofing Nails – 400 Pieces for strong, colour-matched and dependable fixings designed specifically for corrugated bitumen roofing installations.
Thank you for visiting and shopping at www.feltproducts.co.uk. Following are the terms and conditions that constitute our Shipping Policy.
We only deliver to mainland UK excluding the Scottish Isles. All other areas, please call for pricing.
All orders are processed within 2-3 business days. Orders are not shipped or delivered on weekends or public holidays.
If we are experiencing a high volume of orders, shipments may be delayed by a few days. Please allow additional days in transit for delivery. If there will be a significant delay in shipment of your order, we will contact you via email or telephone.
Shipping charges for your order will be calculated and displayed at checkout.
| Shipment method | Estimated delivery time | Shipment cost |
| Standard | 3-5 business days | As specified at checkout |
Delivery delays can occasionally occur.
You will receive a Shipment Confirmation email once your order has shipped containing your tracking number(s). The tracking number will be active within 24 hours.
Felt Products Northern Ltd is not responsible for any customs and taxes applied to your order. All fees imposed during or after shipping are the responsibility of the customer (tariffs, taxes, etc.).
Felt Products Northern Ltd is not liable for any products damaged or lost during shipping. If you received your order damaged, please contact the shipment carrier to file a claim.
Please save all packaging materials and damaged goods before filing a claim.
We currently do not ship outside the UK.
Our Return & Refund Policy provides detailed information about options and procedures for returning your order.
